Product description
Constitute:
Introduction of assembled accessories:
(1) Stringer | |
(2) Beamed | |
(3) Hanging rail adjustment group | |
(4) Main rail suspension block | |
(5) Two-wheel pulley (with swivel hook) | |
(6) Seal plate |
1. Longitudinal rails – (1) It can be divided into (a) 80kg aluminum rail (b) 200kg aluminum rail based on load. (2) According to the required length of the working range, the longitudinal rail can be jointed to extend the length. |
|
2. Cross rail – (1) It be divided into (a) 80kg (b) 200kg based on load (2) It can be divided into (a) no power source - aluminum rail (b) air pressure source - hanging girder, based on source of power |
|
3. Hanging rail adjustment group: The quantity should be calculated according to the load and distance of the rail. | |
4. main rail suspension trolley | |
5.Two-wheeled carriage (with swivel hook)-80kg/200kg- (A) No power source: Electric/pneumatic cranes, vacuum main hanging pipes, zero-gravity hanging rod, etc. can be hung below, to carry out lifting action. (B) Air pressure source: In the bottom there can choose floating controller or button controller for ascending/descending control. |
|
6. Seal plate: block plate in the front and rear ends of longitudinal rail, and in the left and right ends of cross rail |